SIGN UP TO GET €50 COUPON AND €468 WORTH FREE ACCESSORIES!

Email: info@varlascooter.eu
SPECIFICATION
  • Motor
  • Tire
  • Max. Range
  • Display
  • Charger
  • Self Weight
  • Varla Dual Motor, 1000W Each
  • 10 Inches Pneumatic Tire
  • 64+km
  • LCD
  • 2.0A
  • 77 Ibs
  • Frame Material
  • Top Speed
  • Brake
  • Payload Capacity
  • Battery
  • Charging Time
  • Aluminum Alloy
  • 64km/h
  • Dual Hydraulic Brake + ABS
  • 265 Ibs
  • 52V/18.2Ah
  • 8~9 Hours
TECH TIPS

Varla Eagle One unboxing and assembly introduction

P-setting instruction for Varla Eagle One

Accessing settings

  1. Power on your scooter.
  2. Hold the Mode and Power buttons (3seconds) to access the P-setting menu.
  3. Press the Mode button to toggle through P-settings.
  4. Long press the Powerbutton to change the direction of value addition and subtraction, the left display "A" means increasing the value, and the left display "d" means decreasing the value.

 What do A and d mean?

  1. After adjustment, short press the Power button to switch to the next feature and save the previous feature value.
  2. Press the Power button to select the P-setting to adjust.
  3. To save settings, allow the LCD display to timeout (8seconds) or long press Mode and Power buttons to exit the menu.

 Setting menu

Setting

Feature

Notes

P1

LCD brightness

1: low

2: mid

3: high

Default: 3

P2

Speedometer units

0: kph
1: mph
Default: 0

P3

Battery voltage (do not adjust)

From 24V to 72V
Default: 52V

P4

Auto-off time

0: not set
60: 60 min
Default: 5

P5

Unused

 

P6

Wheel diameter (do not adjust)

Default: 10.0

P7

Motor magnets (do not adjust)

From 0 to 255

Default: 28

P8

Power level

1: slowest
100: fastest
Default: 100 km/h

P9

Start mode

0: zero start
1: kick to start
Default: 0

P10

Unused

 

P11

Regenerative/Electronic brake strength

0: off,

1: weak
5: max
Default: 3

P12

Acceleration

0: off

1: weak
5: strong
Default: 3

P13

Unused

 

P14

Unused

 

P15

Automatic scooter voltage shut-down (do not adjust)

From 37.0 to 47.0

Default: 42.0

P16

Lifetime odometer reset

Long-press Mode button to reset to 0

P17

Cruise control

0: off
1: on
Default: 0

P18

Unused

 

P19

Unused

 

P20

Communication protocol (cannot adjust)

Default: 4

Fault codes

After a long period of riding, you may encounter something fault and see one of these codes. So what does the fault code mean? Let's check the table below!

 

Fault Code

Feature

E 02

Brake

E 04

6km/h cruise

E 06

Battery under voltage

E 07

Motor faulty

E 09

Controller faulty

E 10

Faulty comms between controller and LCD

E 11

Faulty comms between controller and LCD

E 12

BMS failure

E 13

Headlight failure

How to replace an electric scooter tire or inner tube?

How to change to hydraulic brakes on an electric scooter?

How to install the front light?

How to install the deck hook on your Varla scooter?

If you have any questions, feel free to contact us!

Unlock €50 OFF