SIGN UP TO GET €50 COUPON AND €468 WORTH FREE ACCESSORIES!

Email: info@varlascooter.eu

Hi Valarscooters, this article covers the basics of

  • How to use your Varla Eagle One 
  • How to set the Speed Unit (kmph/mph)
  • How to adjust the Display Brightness
  • How to Reset Mileage or the like

It is wise to learn proper skills in advance and be ready for your riding. So start to prepare yourself with loads of confidence to join the off-road, or city scooter riding parade.

Here we go!

 

 

 

CONTENT:

1. Accessing Settings

2. P-Setting Menu

3. Fault Codes

 

Accessing Settings

There are two buttons on the QS-S4 throttle: Power and Mode.

 

varla-scooter-p-setting

(QS-S4 throttle)

  1. Power on your scooter.
  2. Hold the Mode + Power buttons (3seconds) to access the P-setting menu.
  3. Press the Mode button to toggle through P-settings.
  4. Long press the Power button to change the direction of value addition and subtraction, the left display "A" means increasing the value, and the left display "d" means decreasing the value.

 

scooter-diaplsy
  1. After adjustment, short press the Power button to switch to the next feature and save the previous feature value.
  2. Press the Power button to select the P-setting to adjust.
  3. To save settings, allow the LCD display to timeout (8seconds) or long press Mode + Power buttons to exit the menu.

 

P-Setting Specification:

Setting

Feature

Notes

P1

LCD brightness

1: low

2: mid

3: high

Default: 3

P2

Speedometer units

0: kph
1: mph
Default: 0

P3

Battery voltage (do not adjust)

From 24V to 60V
Default: 52V

P4

Auto-off time

0: not set
60: 60 min
Default: 5

P5

Unused

 

P6

Wheel diameter (do not adjust)

Default: 10.0

P7

Motor magnets (do not adjust)

From 0 to 255

Default: 28

P8

Power level

1: slowest
100: fastest
Default: 100 km/h

P9

Start mode

0: zero start
1: kick to start
Default: 0

P10

Unused

 

P11

Regenerative/Electronic brake strength

0: off,

1: weak
5: max
Default: 3

P12

Acceleration

0: off

1: weak
5: strong
Default: 3

P13

Unused

 

P14

Unused

 

P15

Automatic scooter voltage shut-down (do not adjust)

From 37.0 to 47.0

Default: 42.0

P16

Lifetime odometer reset

Long-press Mode button to reset to 0

P17

Cruise control

0: off
1: on
Default: 0

P18

Unused

 

P19

Unused

 

P20

Communication protocol (can not adjust)

Default: 4

 

Fault Codes:

Fault Code

Feature

Fault Code

Feature

2

Brake

10

Faulty comms between controller and LCD

4

6 km/h cruise

11

Faulty comms between controller and LCD

6

Battery under voltage

12

BMS failure

7

Motor faulty

13

Headlight failure

9

Controller faulty

 

 

 

 

Varla Eagle One is designed as an off-road electric scooter,  suitable for the outdoor off-road adventure. Let’s explore more together!

Notes on Varla Eagle One Usage.

1

*Turn the key to the right and press the switch button for 3 seconds to turn on the LCD display.  

*When the power is on, press the “Mode” button to change the gear from 1 to 3.

* Long press the “Mode” button, the front light will be on.

 

varla-scooter-long-press

 

 

Pull the brake and the front & rear braking lights will light up. 

scooter-braking-lights

 

3

Press the switch to change single or dual drive.

 

varla-scooter-switch-button

 

4

When you charge the scooter, connect the cable and the charging hole first, then plug in the socket power. Varla Eagle One has 2 charging ports, you can use them at the same time.

 

varla-scooter-charging-ports

 

 

Before your first ride, please read the owner’s manual in advance. For it contains important details related to safety and maintenance.

It will help you a lot !

After you're ready, just go out there, have fun and find your own deck-style.

Let's kick up some dust with Varla Scooter together.

 

 

 

Unlock €50 OFF