Contact Us
  • For Our Customers:

    We are glad to answer all your questions as customers or potential customers.

    Please communicate with us:

  • Online-Sales:

    hi@varlascooter.eu

  • After-Sales:

    support@varlascooter.eu

  • Suggestions & Complaints & Compliments

    info@varlascooter.eu

  • (We'll get back to you within 24 hours. Thank you for your time!)

Pneumatic tires are a popular wheel option when it comes to working on uneven terrain, and they are your best bet for standing up to the challenge and are most commonly used outdoors.

 

Instead of being solid in nature, the tire is filled with air or foam to the desired pressure level to achieve the appropriate load and absorb capability.

 

That’s the reason why we equipped Varla Eagle One - an Off-Road Electric Scooter - with pneumatic tires. Due to their ability to absorb the unevenness of terrain.

 

Changing a tire on scooter featuring dual hub motors is usually the same as it is on their non-electric counterparts.

So when you come to change the tire, you pop the wheel off as you would normally do.

 

So today, we will share with you how to replace a tire or inner tube!

 

 

 

 

WHAT TOOLS DO YOU NEED?

 

  • A 18 mm end wrench or adjustable torque wrench
  • A assembly tool
  • A pump
  • A stool about 30 cm high(or the height fits you best)

 

 

HOW TO REPLACE IT?

 

  1. Remove the wheel

 

Before you start, put the scooter on a stool, then we can replace the tire more easily.

In the first step, use the assembly tool to remove the fender.

Then use an 18 mm end wrench to loosen the axle nuts and the screw on the left swing arm. Then take off the axle nuts on each side, then slide the whole wheel straight back. Remove the left swing arm and place them on the ground. (You don't need to remove the motor wire.)

 varla-scooter-remove-wheel

  1. Remove the brake rotor

 varla-scooter-remove-brake-rotor

Go ahead and take the brake rotor off.

Use the assembly tool to remove the screws one by one, then pull the brake rotor off.

  1. Take off the rim

 varla-scooter-rim

Before we take the tire off, we need to split the right rim. Loosen the screw and remove the rim.

 

*There are many small screws, please save them carefully! 

  1. Take off the tire and inner tube

 varla-scooter-inner-tire

 

 

Now you’ve removed the rim, you can take the tire off easily.

Let’s firmly pull up on the tire, then gently wiggle the tube out from the hole inside the motor. Please make sure that we don’t rip the valve stem.

If the inner tube is full of air before you take the tire off, just let a little bit of air go. So you can slide it out more easily.

  1. Replace the inner tube

 varla-scooter-replace-tire

 

First of all, pay more attention to the direction of the tire. Look at the arrow on the tire, it’s going to rotate this way. Make sure we don’t put it on backward.

Then put the inner tube into the tire. Please note the valve's direction and do not put it on the side without the valve hole.

Afterward, add a little bit of air into the inner tube to make sure it is sealed.

Finally, gently line up our valve stem with the hole on the motor, slide it right on there.

  1. Install them back on the scooter

 varla-scooter-install

 

Then follow the removal steps and install it back on the motor. Go ahead and install our outer ring and brake rotor.

As with installing a tire, look at the brake rotor's arrow direction, let it rotate correctly. 

Tip:

When fastening screws, the better way is to install them in pairs. After installing the first screw at will, the second one is the other side screw.

 

Go ahead and put 1 inside washer on each side. Now we are ready to install the wheel back on the scooter. And make sure that the rotor slides into the brake caliper.

 

Then tighten the axle nuts and swing arm screw by an 18 mm end wrench! 

At this step, the tire replacement process is basically completed. Finally, you can adjust the brake tightness to keep the same distance between the brake pad and the brake rotor.

 varla-scooter-tire-replacement

 

FINAL WORDS

 

Congratulations!

Got more skills!

This is the complete instruction for replacing the inner tube or tire! After reading, do you find out it's straightforward?

If you usually meet puncture or a flat tire, it may be a good time to try off-road tires, which are drainage, load resistance, and strong off-road ability!

If you're interested, you can replace them at any time you want! And you can check out our previous post to learn more about some signals to replace scooter accessories.

 

 

 

Leave a comment

Please note, comments must be approved before they are published

PROMO CODE
VARLA100
PROMO CODE
VARLA300
PROMO CODE
VARLA100
PROMO CODE
VARLA300